Fall Protection Engineering Works

A modular free standing roof edge protection system that does not penetrate the roof membrane.

Safe environment for all working on a roof

One of the HSE recommendations in reducing risk taken by people working on a roof is to select and use the right rooftop safety equipment. For contractors and engineers accessing flat roofs to carry out essential building, repair and maintenance work, safety guardrailing afforded by collective roof edge protection system can make a major contribution to minimising danger. The collective system that is selected must meet the highest safety standards. Our KeeGuard® rooftop guardrail system is fully tested and meets or exceeds current rooftop safety requirements. Not all free standing roof edge protection systems offer this level of security of rooftop areas.

KeeGuard® is a modular free standing rooftop guardrail system which does not penetrate the roof membrane. The system works on a proven counterweight system, recycled PVC weights provide high visibility, non-slip secure base that does not penetrate the roof membrane. Galvanised fittings and tube deliver collective protection which ensures a safe working environment for anyone working on a roof.

The KeeGuard® roof edge protection system offers maximum flexibility for most rooftop configurations, almost any flat roof up to 3 degrees can be accommodated. The system is available for different roof types, either for use where a restraining wall such as a parapet is in place or where the rooftop is completely open around the perimeter. The KeeGuard® rooftop guardrail system can be used for retrofitting to older buildings as well as for new constructions.

The KeeGuard® systems is also available in a lightweight aluminium version.

There is also available a newly launched KeeGuard® Foldshield folding version and a unique, fixed roof edge protection system named KeeGuard® Topfix especially designed for standing seam metal roofs.

A simple and cost effective rooftop safety system

• Provides collective protection for all working on a roof
• Works on a proven counterbalance system
• No penetration of the roof membrane
• Minimum components for ease of installation
• Unique open style fitting allows quick installation of horizontal rails
• No welding, threading or bolting required on site
• Suitable for use on concrete, asphalt, PVC membrane and felt roof surfaces
• Modular design allows reconfiguration on site if needed
• Sections can be added to or taken down, for reconstruction elsewhere
• Compatible with almost all configurations of flat roofs up to 3 degrees slope

Setting the rooftop safety standards

• EN ISO 14122 Part 3
• EN 13374 Class A
• HSG-33 Health & Safety in Roof Work
• HSE INDG 284 “Working on roofs”
• BS 6399: Part 2 1995 Wind Code

Back to the top

The KEE DOME structure is safety compliant, remains completly free-standing and eliminates the risk of damage to the roof membrane.

The main features of KEE DOME:

• Modular system using standard components
• Made from 48.3 O/D tube (Size 8)
• Recycled PVC feet
• Complies with EN 14122 pt3
• Suitable for use on all roof surfaces with a maximum pitch of 3 degrees
• Available in any RAL colour if required.

INSTRUCTIONS FOR THE DESIGN AND INSTALLATION OF KEE DOME SKYLIGHT PROTECTION SYSTEMS.

ASSEMBLY INSTRUCTIONS FOR KEE DOME

Before assembly / installation, check the roof area concerned is free from the following:

Snow; ice; lubricants; loose substances or; any obstructions that would prevent installation of the feet.
Check if P.P.E. is required for the duration of the installation.

Position the feet at the corners (right against the corner).
Position the clamping ring into the slot of each base (ensuring the grub-screw is accessible).
Drop a pre-assembled upright into each base
Measure the required length for each rail
Cut rails and assemble
Make sure bases are still against the skylight / curb.
Tighten grub-screws to 39N/m.
SPECIFIC LIMITATIONS

N.B. Please note that the ‘wobble’ evident in an individual upright assembly is necessary for manufacture and installation, and disappears when the installation is complete.

The system is designed as a complete unit, and should not be used with gates or openings.
Do not use Kee Dome (or Kee Guard) for attaching safety lines / wires, lanyards or abseiling lines.
The system is re-usable, but the grub-screws are not, and must be changed if the system is dismantled and reinstated.
Fittings that are, or appear to be welded, modified or damaged / defective must not be used.
Fittings should be positioned to minimise any collection & retention of rainwater by grub-screws.
Do not mix Kee Klamp fittings with any other brands.
MAINTENANCE REQUIREMENTS

In the event of Kee Dome being ‘used’, the system should be checked and any damaged items replaced with Kee Klamp original parts. Without such an occurrence the system must be checked ‘yearly’ to ensure no damage has been sustained, and that grub-screws are still to the correct torque

TRANSPORTATION AND STORAGE

There are no particular limitations as to transportation and storage of fittings other than they should be kept in a dry and ventilated environment.

ALWAYS REFER TO AUTHORISED KEE KLAMP PRODUCT LITERATURE OR TO THE WEBSITE (www.keesafety.com). FOR FURTHER INFORMATION ON THE USE OF FITTINGS AND THEIR ASSEMBLY AND INSTALLATION. IN CASE OF DOUBT, ASK KEE KLAMP LTD OR YOUR LOCAL AUTHORISED KEE KLAMP DISTRIBUTOR.

Back to the top